Mini Wire
The MW Series (Mini Wire) Benchtop Heaters are versatile and economical equipment that allow the processing and bending of sheets and sheets of thermoplastic materials such as plexiglass, polycarbonate, PVC, polyethylene and Corian, etc.
They adapt to sheets of all thicknesses between 1 and 8 mm.
With the MW Series heaters it is possible to perform localized heating in order to proceed with the bending (manually) of the different sheets. This occurs in unilateral mode. In the case of thicknesses greater than 5-6 mm it is still possible to perform heating by simply turning the sheet over in order to obtain uniform heating.
The MW Series Heaters, available in various sizes, are made following the criteria of maximum reliability, durability, ease of use and meet the needs of the most diverse types of processing.
WIRE
HEATERS
HEATERS
| Features | MW500 | MW800 | MW1000 |
|---|---|---|---|
| Working width (mm) | 500 | 800 | 1000 |
| Number of resistors | 1 | 1 | 1 |
| Workable thickness (mm) | 1-8 | 1-8 | 1-8 |
| Heating area width (mm) | 20 | 20 | 20 |
| Resistance height adjustment (mm) | Fixed | Fixed | Fixed |
| Minimum bending center distance (mm) | 15 | 15 | 15 |
| Maximum bending center distance* (mm) | 300 | 300 | 300 |
| Measuring (WxDxH)** | 580 x 530 x 200 | 880 x 530 x 200 | 1080 x 530 x 200 |
| Weight (Kg) | 7.5 | 10 | 15 |
| Power Supply | 230V 50-60Hz | 230V 50-60Hz | 230V 50-60Hz |
| Type of resistors | NiCr Wire | NiCr Wire | NiCr Wire |
| Resistor power supply | Low Voltage | Low Voltage | Low Voltage |
| Absorbed power (kW) | 0.25 | 0.35 | 0.50 |
* other sizes on request
** desk model (without trestle)
